Iphone 13 Pro Max MT6735 [Turkish Copy] Clone Scatter Firmware Free Download 100% OK

 Iphone 13 Pro Max MT6735 [Turkish Copy] Clone Scatter Firmware Free Download 100% OK

Here are the steps on how to flash an MTK phone using SP Flash Tool:

1. Download and install the SP Flash Tool and the MTK USB drivers on your computer.
2. Download the stock firmware for your MTK phone. You can find the stock firmware on the manufacturer's website or on a trusted third-party website.
3. Extract the stock firmware to a folder on your computer.
4. Open SP Flash Tool on your computer.
5. Connect your MTK phone to your computer in download mode. If you enter download mode, follow these below steps carefully:

• Turn off your MTK phone.
• Press the Volume Down, Power, and Home button at the same time.
• When you see the Download Mode screen, release the buttons.
• SP Flash Tool should now detect your MTK phone in download mode.

1. In SP Flash Tool, click the Scatter File button and select the scatter file from the extracted stock firmware folder.
2. Click the Download button in SP Flash Tool to begin flashing the stock firmware to your MTK phone.
3. Once the flashing process is complete, your MTK phone will reboot.

Note: Flashing an MTK phone can be a risky process. If you do not follow the steps correctly, you can brick your phone. It is recommended that you back up your phone's data before flashing it.

Here are some additional tips for flashing an MTK phone:

• Make sure that you are using the correct stock firmware for your MTK phone. Using the wrong stock firmware can brick your phone.
• Make sure you use a good quality type USB cable. A bad quality USB cable can cause the flashing process to fail.
• Do not interrupt the flashing process. Interrupting the flashing process can brick your phone.
• If the flashing process fails, try again using a different USB cable.
• If the flashing process still fails, contact the manufacturer of your MTK phone for assistance.

Download Link: Link 1